Flamecheck Paint-IN

Flamecheck Paint-IN meets or exceeds the ASTM E-84 standards with a “Class A” rating on most building materials.

• Non-Toxic
• Non-Corrosive
• Environmentally Friendly
• Safe around kids and pets
• Low VOCs
• Made in the USA

Flamecheck Paint-IN is available in any color.  When dry and cured it is washable.  UV stable and has been tested for over 20 years without cracking or peeling.  *Paint can vary from batch to batch, order enough paint to complete the job in one order, we cannot guarantee the color and sheen to match from batch to batch.   Do Not Dilute Flamecheck Paint-IN.

Flamecheck Paint-IN Applications:

• Wood
• Paneling
• Drywall
• Wallpaper
• Most paintable surfaces

Coverage: Approximately 250-300 sq. ft. per gallon per coat.  For ASTM E-84 “Class A” finish apply two coats of 2 mils thick (dry).  Always test to verify.  Do not dilute. Mix well.

Use Flamecheck Paint-IN:

• Commercial
  • Hotels & Motels
  • Conference Centers
  • Movie Theaters
  • Restaurants
  • Shopping Centers
  • Casinos
  • Nightclubs
• Residential
  • Kitchen
  • Bedrooms
  • Garage
  • Stairways & Hallways

Flamecheck Paint-IN Certifications & Testing:

• ASTM E-84 (spread of flame test) Certified on various building materials.
• This “Class A” fire-retardant paint passes the ASTM E-84 Steiner Tunnel test.
  • ASTM E-84 Test on wallpaper covering
  • ASTM E-84 test on Drywall
  • ASTM E-84 test on wood paneling
  • ASTM E-84 test on pine lumber
  • ASTM E-84 test on Hemlock wood panel

• Flamecheck Paint-IN meets or exceeds worldwide fire-retardant standards on most substrates and building materials
  • French M1 & M3
  • British BS 5852
  • British 476 part 7
  • CAN 4-S102

Test:  Always perform a test on a sample piece of material to verify that your application technique is successful. Not tested or approved for use over oil-based products.

Safety Note:  Use standard paint precautions, such as providing adequate ventilation.  Keep away from the face and eyes and store Flamecheck Paint-X out of reach of children. Wear safety goggles, dust masks, gloves, and an apron.

Application:

• An airless spray gun with a fan nozzle of 1.2 mm to 1.7 mm is recommended. With 500 sq. ft. or more an airless paint sprayer that operates out of a 5-gallon container is recommended.
• Smaller applications can be applied with a high-quality paintbrush or roller.
• Surface Preparations: Be sure the material you are treating is clean and free of dust, grease, and unsightly spots.
• Clean up: Use soap and water, follow standard cleaning instructions for latex paint.
• Disposal: Follow local guidelines for latex paint disposal.

Other Features & Uses of Flamecheck Paint-IN:

• Gives “Class A” fire protection to most building materials.
• For use on wood, paneling, brick, drywall, or any paintable surface.
• UV stable and has been demonstrated to significantly inhibit sun fading.
• Flamecheck Paint-IN helps to protect wood from mildew and dampness.
• When dry, Flamecheck Paint-IN drastically decreases the danger of fire spreading and flash-over by raising the point of ignition.
• Flamecheck Paint-IN is safe to use in areas of daily human contact.
• Flamecheck Paint-IN is extremely durable and has been known to last up to 20 years under normal conditions. Check annually for any peeling or flaking paint, that must be repainted.
• 5-year shelf life in a sealed/unopened container.

Disclaimer: Flamecheck makes no guarantee, nor any express or implied warranty of merchantability or fitness for a particular use regarding the suitability of this product for any particular purpose or use, nor does it assume any liability arising out of the application or mis-use of this product. Application techniques vary; therefore, it is the end user’s responsibility to test and verify the application techniques and suitability of this product for the intended use. Always test after application. Flamecheck International LLC only warrants the quality control of this product.

Keep out of the reach of children. Ingestion of this product, or contact with eyes or skin, can result in serious injury. Use in a well-ventilated area. If swallowed CONTACT A MEDICAL PROFESSIONAL IMMEDIATELY. Contact with eyes or skin, flush with copious amounts of water for 15 minutes. If irritation persists, seek medical attention. Never give anything by mouth to an unconscious person.